Tatting Patterns - Chrysanthemum

This lovely, tatted Chrysanthemum pattern was kindly contributed by designer Linda S Davies

Materials: Mercerized crochet cotton size 20 in any chrysanthemum colour. 24 gauge green wire approx 15cm long; Medium sized yellow bead. Large sized green bead. Craft glue.

Version One: Large Petal (make three)

Centre r 1 - 2 - 2 - 2 - 2 - 2 - 1 cl. Tie ends and dab knot with glue.

Wind shuttle and do not cut from ball, j to any p on centre r.

*Ch 5ds, 1 dropped picot (dp) worked by 1st half of ds do not flip and draw almost up to last ds leaving a gap of 2mm to make a very small picot, 2nd half of ds do not flip and draw completed non-flipped ds very close to last ds, (It is very important to draw the non-flipped ds as close as possible at this point otherwise it will not draw up when you continue to tat in the normal way.), 4 ds, 1dp, 4 - (all p are lp) 1 - 1 - 5 + (to last dp made) 5 + (to first dp made) 5ds, j to same p on centre r, 2ds, j to next p on centre r, rep from * and continue all the way around making 6 petals in all and joining last 2ds to starting point.

Small Petal (make two)

Centre r 1 - 2 - 2 - 2 - 2 - 2 - 1 cl. Tie ends and dab knot with glue.

Wind shuttle and do not cut from ball, j to any p on centre r. Ch 5ds, 1dp, 4 - 1 - 1 - 5 + (to dp) 5ds, j to same p on centre r, 2ds, j to next p on centre r, rep from * and continue all the way around making 6 petals in all and joining last 2ds to starting point.

Make 2 rings with extra long picots sep by 1ds - 1 with 12 p and one with 9 p. Trim the ends to the same length as the picots and snip all the picots. Using a pin/needle separate all the snipped picot threads and fray as much as possible.

To Make Up:

1. Make all the tatted parts required for one complete flower.

2. Cut a wire to approx 15cm (6 inches) long.

3. Glue a yellow bead to one end of the wire.

4. Always threading from the bottom of the wire, glue the smaller long picot ring to the bead. (I always glue this and the next ring with the “wrong side upper” so that the picots curve upwards.)

5. Next glue the larger long picot ring to the base of the last ring.

6. Now the sequence is the two smaller petals and then the three larger petals, but this time make sure that the “right side” of the petals is uppermost so that the petals will curve naturally downwards as in a real chrysanthemum. Make sure that each petal does not sit exactly on top of each other, the petals need to be offset.

7. Glue the large green bead (to replicate a seed pod) to the base of the petals.

8. When completely dry, curve the petals into a natural shape.

Version Two: Continue in the same way as version one until you reach the lps at the tip of the petals. In version two separate the long picots with 2ds.

Make 2 rings with extra long picots but this time do not snip.

U get many more from here...

Tatting Patterns - Pretty Practical Bookmark

This pretty, tatted doily pattern was kindly contributed by designer Linda S Davies Materials: One 20g ball mercerised crochet cotton size 20; One shuttle; Finished size: approx 23cm (9 inches). Instructions: R of 3ds, 5p sep by 3ds, 3ds, cl. RW. *Ch of 5ds, p, 5ds. RW. R of 3ds, j to last p of first r, 3ds, 4p sep by 3ds, 3ds, cl. RW. Rep from * 18 times more (20 rings in all). RW Ch of 3ds. RW Work three ring cluster as follows: R of 3ds, j to last p of last r, 3ds, 6p sep by 3ds, 3ds, cl. R of 3ds, j to last p of last r, 8p sep by 3ds, 3ds, cl. R of 3ds, j to last p of last r, 3ds, 6p sep by 3ds, 3ds, cl. RW Ch of 3ds. RW. *R of 3ds, j to p of last r, 3ds, 4p sep by 3ds, 3ds, cl. RW. Ch of 5ds, p, 5ds. RW. Rep from *18 times more. RW. R of 3ds, j to last p of last r, 3ds, 4p sep by 3ds, 3ds, cl. RW. Ch of 3ds, 7p sep by 3ds, 3ds, j to centre p of last ring. **Ch of 3ds, 3p sep by 3ds, 3ds, j to centre p of next r. Rep from **18 times more. Ch of 3ds, 5p sep by 3ds, 3ds, j to centre p of first r in three ring cluster. Ch of 3ds, 5p sep by 3ds, 3ds, j to 2nd free p on next r of cluster. Ch of 3ds, 5p sep by 3ds, 3ds. RW. R of 7ds, j to centre p of same r, 7ds, cl. RW. Ch of 3ds, 5p sep by 3ds, 3ds, miss one p and j to next p on same r. Ch of 3ds, 5p sep by 3ds, 3ds, j to centre p of last r of cluster. Ch of 3ds, 5p sep by 3ds, 3ds, j to centre p of next r. *Ch of 3ds, 3p sep by 3ds, 3ds, j to centre p of next r.    Rep 18 times more. Ch of 3ds, 5p sep 3ds, 3ds, j to base of last r. Ch of 3ds, j to last p of last ch, 3ds, p 3ds, j to first p of first ch, 3ds, j to base of first r. Tie ends and cut. Dab craft glue over knot. Press carefully into shape using spray starch. U get many more from here...

Tatting Patterns - Tatted Motif

Here is a square motif that measures about 2¾ inches square. Any number of motifs may be joined to form desired design—vanity or chair set, luncheon or tablecloth.
Abbreviations: ds (double stitch) clr (close ring) p (picot) r (ring)
Make a r of (4 ds, p) 3 times, 4 ds, cl r. Make 4 rs and join to form a square.
Make a center row by joining 7 squares in a row. Join 3 squares onto center 3 squares of center row and each side, then 1 square on each side of center square of each 3 squares.
Outside Border—Using two shuttles, make r of 4 ds, join to p of corner square, 4 ds, cl r. Ch 6 ds, p, (2 ds, p) twice, 6 ds. R of 4 ds, join to next free p, 4 ds, cl r. Ch 6 ds, p, (2 ds, p) twice, 6 ds. R of 4 ds, join to p of next r, 4 ds, cl r. Ch 6 ds, (p, 2 ds) 6 times, p, 6 ds. Continue around motif in same manner.
The illustration shows 12 motifs joined for end pieces and center piece has 8 squares joined. However, the motifs may be joined to form any size.

U get many more from here..

Craft Projects - Tatted Picture

What you need: 4 x 5-inch (inside measurement) picture frame; 5 x 6-inch black felt; an inch square of gold felt; number 30 crochet cotton in the following amounts and colors: 5 yards each of white and brown, 8 yards gold and 10 yards green. Also need two 4 x 5-inch cardboards, a tatting shuttle and number 13 steel crochet hook.
Edible Crafts: Candy Bouquets and Centerpieces. Make Them For Fun & Profit.
Abbreviations: r (ring) rw (reverse work) ds (double stitch) p (picot)
cl r (close ring) sep (separated) ch (chain)
What to do:
Daisy Center: With brown on shuttle and ball, r of 1 ds, 10 small p sep by 1 ds, cl r, join in last p. (Ch 1 ds, p, 1 ds, join in next small p of r) 5 times. Tie and cut threads. Make three.
Daisy Petals: With yellow on shuttle and ball, join in p of first ch on center, ch 10 ds, p, 7 ds, p, 3 ds, join in same pat base of ch, * join in next p, ch 3 ds, join in last p of last ch, 7 ds, 2 p sep by 7 ds, 3 ds, join in same p at base of ch, repeat from * 3 times, leave off last p of last ch. Make three.
Stems: With green on shuttle and ball, join between second and third petals of a daisy, short stem at right has 55 ds. Stem for center daisy has 65 ds. Stem for left daisy has 70 ds.
Lily of the Valley Stem and Flowers: With white on shuttle and green on ball, start at bottom, ch 50 ds, (r of 3 ds, 4 p sep by 1 ds, 3 ds, cl r, rw. Ch 5 ds, rw) twice. (R of 3 ds, 4 p sep by 1 ds, 3 ds, cl r, rw. Ch 2 ds, rw) 7 times. (R of 5 ds, p, 5 ds, cl r, rw. Ch 2 ds, rw) twice. R of 5 ds, p, 5 ds, cl r. Tie and cut threads.
Leaf: With green on shuttle and ball, ch 6 ds, 12 p sep by 6 ds, 6 ds, rw. (Ch 6 ds, join in next p) 12 times, ch 6, join at base of first ch. Tie and cut threads.
Arrange on black felt as shown in photograph or make your own arrangement. Sew in place. Sew felt pot over ends of stems. Center floral arrangement over cardboard, fold felt over cardboard and glue to back. Glue second cardboard securely to back. Fasten in frame.

u get many more from here..

Tatting Patterns - Clover Leaf Doily

This beautiful, tatted doily pattern was kindly contributed by designer Linda S Davies

Tatting Abbreviations: r . ring;  lp . long picot;  lr . large ring;  ch . chain;  sr . small ring;  sp . space;  ds . double stitch;  sep . separated; p . picot;  cl .close;  smp . small picot;  rw . reverse work

Materials: Crochet cotton size 20, 1 X 20g ball in brown and 1 X 20g ball in cream, shuttle, joining hook, flexible craft glue. Traditional Instructions: Tie ball and shuttle threads together. Weave ends in if you are able, if not, trim ends to 2mm and glue down neatly at the end of the round. Do not trim ends until the end of the round otherwise the knot may come undone while you are working.

1st Round: R of 3ds, 3p sep by 3ds, 3ds, cl. R of 3ds, j to last p on 1st r, 5ds, p, 5ds, p, 3ds. R of 3ds, j to last p of last r, 3ds, 2p sep by 3ds, 3ds, cl, rw. (clover leaf made) Ch 7ds, rw. Make 3 more clover leaves joining 2nd p of last r to 2nd p of first r all round and 3 more ch joining last ch to starting point. Tie ends, trim to 2mm and glue down neatly.

2nd Round: Tie ball and shuttle thread tog. R of 1ds, 5p sep by 1ds, 1ds, cl, rw. Ch of 3ds, p, 3ds, rw. R of 1ds, j to last p of 1st r, 1ds, 4p sep 1ds, 1ds, cl, rw. Continue in this manner all around joining every 5th ch to p of centre r in clover leaf of first round, joining last r to 1st r and last ch to starting point. Tie ends, trim to 2mm and glue down neatly.

3rd round: Tie ball and shuttle threads tog. R of 1ds, 2p sep by 1ds, j to centre p of any ring on 2nd round, 1ds, 2p sep by 1ds, 1ds, cl, rw. Ch of 5ds, p, 5ds, rw. Repeat all the way around joining last ch to starting point. Tie ends, trim to 2mm and glue down neatly.

4th round: Tie ball and shuttle threads tog. Make clover leaf in same way as 1st round, rw. Ch of 7ds, j to any p on 3rd round, 7ds, rw. Continue all around joining each clover leaf by 2nd p of 1st r to 2nd p of last r. Join last r of last clover leaf to 2nd p of 1st r in 1st clover leaf and last ch to starting point. Tie ends, trim to 2mm and glue down neatly.

5th round: Tie ball and shuttle threads tog. R of 3ds, p, 3ds, j to any free p on clover leaf round, 3ds, p, 3ds, cl rw. *Ch of 5ds, p 5ds, rw. R of 3ds, j to last p of last r, 3ds, 2p sep by 3ds, 3ds, cl, rw. Repeat from* all around joining last ch to starting point. Tie ends, trim to 2mm and glue down neatly.

6th round: Repeat 4th round.

Diagram Instructions:

1st Round. (Following diagram start at A *R 3 - 3 - 3 - 3; R 3 + 5 - 5 - 3: R 3 + 3 - 3 - 3. Clover leaf. RW Ch 7. RW. Rep from * three times more joining last clover leaf to first clover leaf and last chain to starting point.

2nd Round. R 1 - 1 - 1 - 1 - 1 - 1. RW Ch 3 - 3. RW R 1 + 1 - 1 - 1 - 1 - 1. RW Continue in this manner all around joining every 5th ch to p of centre r in clover leaf of first round, joining last r to 1st r and last ch to starting point.

3rd Round. Join centre p of each r to centre p of each r on 2nd round. R 1 - 1 - 1 + 1 - 1 - 1. RW Ch 5 - 5. RW Rep all round joining last ch to starting point.

4th Round. Join all chains to chains on 3rd round. Work one clover leaf as 1st round. RW Ch 7 + 7 Continue all round joining clover leaves as in 1st round and joining last ch to staring point.

5th Round. Join every other r to centre r of clover leaf of 4th round. R 3 - 3 + 3 - 3. RW Ch 5 - 5. RW R 3 + 3 - 3 - 3. RW Ch 5 - 5. RW R 3 + 3 + 3 - 3. RW Continue all round joining last r to first r and last ch to starting point.

6th Round. Work as for 4th round.

u get many more from here..

Tatting Patterns - Tatted Buttons

Materials: You will need 1/2 inch pearl buttons with a shank, tatting shuttle, approximately 5 yards number 30 crochet cotton for each button and size 13 steel crochet hook for joining picots.
Abbreviations: r (ring) p (picot) ch (chain) sep (separate) ds (double stitch) rw (reverse work) cl r (close ring) rnd (round)
Button Cover Center: R of (1 ds, small p) 8 times, cl r. Do not cut threads.
Rnd 1: Tie ball thread to shuttle thread, pull thread through last p of r in same manner as joining p, (ch small p, 2 ds, join in next p) 8 times. Do not cut threads.
Rnds 2, 3: (Ch small p. 3 ds, join in next small p) 8 times. Do not cut threads.
Rnd 4: Work in same manner as Rnds 2 and 3. Tie and cut threads.
Place top of button inside tatted circle. Gather at back with needle and thread. Fasten on back close to shank.
Petals: Working from back, join ball and shuttle threads in small p of Rnd 3, ch 6 ds, 3 p sep by 9 ds, 6 ds, join in same small p, ch 2 ds, join in next small p, *ch 6 ds, join in last p of last ch, 9 ds, 2 p sep by 9 ds, 6 ds, join in same small p of Rnd 3, ch 2 ds, join in next small p of Rnd 3. Repeat from * around, last p of last ch must be joined to first p of first ch and last ch 2 ds is joined at base of first ch. Tie and cut threads.
The covered button should stand up above the petals.

u get many more from here..

Tatting Patterns - White Snowflakes

To make this star within a star snowflake, you will need approximately 25 yards of number 20 crochet cotton, a tatting shuttle and a size 12 crochet hook.
Abbreviations:
r (ring) cl r (close ring) p (picot) ch (chain) ds (double stitch) rw (reverse work) sep (separated) rnd (round)
Rnd 1: R of 1 ds, small p, 3 ds, 3 p sep by 1 ds, 3 ds, small p, 1 ds, cl r. * R of 1 ds, join in last small p of last r, 3 ds, 3 p sep by 1 ds, 3 ds, small p, 1 ds, cl r. Repeat from * 4 times, join last small p of last r to first small p of first r. Tie and cut threads.
Rnd 2: R of 2 ds, 4 p sep by 2 ds, 2ds, join in center p of r in previous rnd, 2 ds, 4 p sep by 2 ds, 2 ds, cl r, rw. Tie ball thread to shuttle thread, ch 3 ds, 3 p sep by 2 ds, 3 ds, do not rw. R of 2 ds, 5 p sep by 2 ds, 2 ds, cl r, rw. Ch 2 ds, 4 p
sep by 2 ds, 2 ds, join in second p of last r, ch 2 ds, 2 p sep by 2 ds, 2 ds, do not rw. R of 2 ds, p, 2 ds, long p, 2 ds, p,
2 ds, cl r. Ch 2 ds, 2 p sep by 2 ds, 2 ds, join in second free p of last r where ch was joined, ch 2 ds, 4 p sep by 2 ds, 2 ds, join at base of same r. Ch 3 ds, 3 p sep by 3 ds, 3 ds, rw.
Repeat from * 5 times, join last ch at base of first r. Tie and cut threads.

Snowflakes for Christmas add their own special touch. To make this snowflake, you will need about 22 yards of number 20 crochet cotton, tatting shuttle and a size 12 steel crochet hook for joining picots.
R of 1 ds, (1 long p, 1 small p) 6 times, cl r. Tie and cut threads.
Rnd 1: Join ball and shuttle threads in small p. *ch 5 ds, 5 p sep by 2 ds, 5 ds, join in next small p. Repeat from * around, join last ch at base of first ch. Tie and cut threads.
Rnd 2: Join ball and shuttle threads in center p of ch, ch 3 ds, 3 p sep by 2 ds, 7 ds, rw. R of 3 ds, p, 1 ds, long p, 1 ds, p, 3 ds, cl r, rw. Ch 2 ds, 3 p sep by 2 ds, 2 ds, join in first p of last r, ch 2 ds, 2 p sep by 2 ds, 2 ds, long p, 2 ds, 2 p sep by 2 ds, 2 ds, sk long p of r, join in next p of same r, ch 2 ds, 3 p sep by 2 ds, 2 ds, join at base of r, rw. Ch 7 ds, 3 p sep by 2 ds, 3 ds, join in center p of next ch of previous rnd. Repeat from * around, join last ch at base of first ch. Tie and cut threads.

U Get many more from here..

Tatting Patterns - Tatted Doily

Here is a versatile square doily to add to your collection. The completed model measures about 7 inches square when made with number 20 crochet thread. Use ball and shuttle.
Abbreviations: (ring) ch (chain) ds (double stitch) cl r (close ring) rnd (round) Sep (separated) p (picot).
To begin, make a r of (4 ds, p) 3 times, 4 ds, cl r, tie and cut.
Rose Center: With ball and shuttle, join thread to a p, (ch 6 ds, join to next p) 3 times, 6 ds, join, tie and cut.
Next Rnd: (Ch 8 ds, join to p) 3 times, ch 8 ds. Work next 3 rnds in same manner, making ch of 2 greater each time between joinings to p on each rnd—l0 ds, 12 ds, 14 ds.
Last Rnd: * Ch 6 ds, (p, 2 ds) twice, p, 6 ds, join, repeat from * around. Tie and cut. This completes the center rose.
Rnd 1: * R of 4 ds, join to first p of a 3 p group on ch, 4 ds, cl r. Ch 5 ds, (p, 2 ds) twice, p, 5 ds. R of 4 ds, join to third p of same 3 p group on ch, 4 ds, cl r. Ch 5 ds, (p, 2 ds) twice, p, 5 ds, r of 4 ds, join at point where rose chs are joined, 4 ds, cl r.  Ch 5 ds, (p, 2 ds) twice, p, 5 ds,  repeat from * around. Tie and cut.
Rnd 2: * R of 4 ds, join to first p of a ch, 4 ds, cl r. Ch 5 ds, (p, 2 ds) twice, p, 5 ds. R of 4 ds, join to third p of same ch, 4 ds, cl r. (Ch 5 ds, 3 p sep by 2 ds, 5 ds. R of 4 ds, join to center p of next ch, 4 ds, cl r) twice, ch 5 ds, 3 p sep by 2 ds, 5 ds, repeat from * around. Tie and cut.
Rnd 3: * R of 4 ds, join to first p of ch, 4 ds, cl r. Ch 5 ds, 3 p sep by 2 ds, 5 ds, 3 p sep by 2 ds, 5 ds. R of 4 ds, join to third p of same ch, 4 ds, cl r. This forms a corner. (Ch 5 ds, 3 p sep by 2 ds, 5 ds. R of 4 ds, join in middle p on next ch, 4 ds, cl r) 3 times. Ch 5 ds, 3 p sep by 2 ds, ch 5 ds, repeat from * around. Tie and cut.
Rnd 4: * R of 4 ds, p, 4 ds, cl r. Ch 5 ds, p, 2 ds, join to center p of first 3 p group on corner ch in previous rnd, 2 ds, p, 5 ds. Make cloverleaf of r, 4 ds, (p, 4 ds) 3 times, cl r. R of 4 ds, join to last p of last r, 4 ds, (p, 2 ds) twice, p, 4 ds, p, 4 ds, cl r. R of 4 ds, join to last p of last r, 4 ds, (p, 4 ds) twice, cl r—cloverleaf completed. Ch 5 ds, p, 2 ds, join to center p of next 3 p group on same corner ch, 2 ds, p, 5 ds. (R of 4 ds, p, 4 ds, cl r. 5 ds, p, 2 ds, join to center p of next ch, 2 ds, p, 5 ds) 4 times. Repeat from * around. Tie and cut.
Rnd 5: * R of 4 ds, join to p of r just before cloverleaf on previous rnd, 4 ds, cl r. (Ch 5 ds, 3 p sep by 2 ds) twice, ch 5 ds. R of 4 ds, join to first p of center of cloverleaf, 4 ds, cl r. (Ch 5 ds, 3 p sep by 2 ds) twice, 5 ds. R of 4 ds, join to last p of same r on cloverleaf, 4 ds, cl r. (Ch 5 ds, 3 p sep by 2 ds) twice, 5 ds. R of 4 ds, join to next free p of r after cloverleaf, 4 ds, cl r. (Ch 5 ds, 3 p sep by 2 ds, 5 ds. R of 4 ds, join to next free p along side, 4 ds, cl r) 3 times, ch 5 ds, 3 p sep by 2 ds, 5 ds, repeat from * around.
Rnd 6: * R of 4 ds, join to center p of first 3 p group on corner ch, 4 ds, cl r. (Ch 5 ds, 3 p sep by 2 ds) twice, 5 ds. R of 4 ds, join to center p of next 3 p group on same ch, 4 ds, c r. Ch 5 ds, 3 p sep by 2 ds, 5 ds. R of 4 ds, join in center p of next 3 p group on next ch, 4 ds, cl r. 5 ds, 3 p sep by 2 ds, 5 ds. R of 4 ds, join in center p of next p group on same ch, 4 ds, cl r. (Ch 5 ds, 3 p sep by 2 ds, 5 ds. R of 4 ds, join in center p of next ch, 4 ds, cl r) 4 times. 5 ds, 3 p sep by 2 ds, 5 ds. R of 4 ds, join to center p of first p group on next ch (just before corner), 4 ds, cl r. 5 ds, 3 p sep by 2 ds, 5 ds. R of 4 ds, join in center p of next p group on same ch, 4 ds, cl r. Ch 5 ds, 3 p sep by 2 ds, ch 5 ds. Repeat from * around. Tie and cut.

U get many more from Here.

Tatting Patterns- Tatted Butterfly

You will need: Approximately 75 yards number 30 crochet cotton in the color of your choice, a tatting shuttle and size 14 steel crochet hook for joining picots.
Abbreviations: r (ring) p (picot) ch (chain) sep (separate) cl r (close ring)  rw (reverse work) ds (double stitch)
Head: R of 5 ds, 4 p sep by 2 ds, 5 ds, cl r, rw.
Body: Large r of 20 dc, p. 20 ds, cl r, rw. Ch 4 ds, 2 p sep by 12 ds, 4 ds, join in p of last r, rw. R of 12 ds, p, 12 ds, cl r, reverse r. Ch 2 ds, p, 10 ds, join in p of last r, rw. R of 5 ds, long p, 5 ds, cl r (forms tail). Ch 10 ds, p. 2 ds, join between r's. Ch 4 ds, 2 p sep by 12 ds, 4 ds, join between head and body. Tie and cut threads.
Upper Wing: Join in lower p of ch around large r, ch 5 ds, rw. R of 3 ds, p, 3 ds, join in upper p of same ch, 3 ds, p, 3 ds, cl r, rw. Ch 5 ds, rw. R of 4 ds, long p, 4 ds, cl r, rw. Ch 5 ds, join in p of first r of upper wing, 5 ds, 2 p sep by 5 ds, 5 ds, rw. *R of 4 ds, join in long p of r, 4 ds, cl r, rw. Ch 5 ds, 3 p sep by 5 ds, 5 ds, rw. Repeat from * 3 times. R of 4 ds, join in same long p of r, 4 ds, cl r, rw. Ch 5 ds, rw. R of 3 ds, p, 3 ds, rw. Ch 5 ds, join in same p where upper wing began. Tie and cut threads.
Lower Wing: Join in p of lower body, ch 5 ds, rw. R of 3 ds, long p, 3 ds, cl r, rw. Ch 5 ds, join in p of last small r of upper wing, 5 ds, 2 p sep by 5 ds, 5 ds, rw. (R of 3 ds, join in long p of r, 3 ds, cl r, rw. Ch 5 ds, 3 p sep by 5 ds, 5 ds, rw) twice, r of 3 ds, join in same long p, 3 ds, cl r, rw. Ch 5 ds, join in same p where lower wing began. Tie and cut threads.
Outer Edge Around Wings: Join where upper wing joins body, ch 2 ds, 2 p sep by 2 ds, 2 ds, join in center p of next ch of upper wing (next free p). (Ch 2 ds, 6 p sep by 2 ds, 2 ds, join in center p of next ch) 4 times. Ch 1 ds, join in next center p of lower wing. (Ch 2 ds, 6 p sep by 2 ds, join in next center p of lower wing) twice. Ch 2 ds, 6 p sep by 2 ds, join in same p where lower wing began. Tie and cut threads. Repeat upper and lower wing directions on other side of body.
Antennae: R of 6 ds, cl r, rw. Ch 26 ds, join in second p of head, ch 1 ds, join in next p of head, ch 26 ds, rw. R of 6 ds, cl r, rw. Tie and cut threads.
Shape and press under damp cloth. Spray starch will help to retain shape.

U get many more from Here..

Tatting Patterns - Hearts Doily

The delicate artistry of tatting lends an heirloom quality to this lovely doily. When made with size 30 crochet cotton the doily measures approximately 9 inches. You will need a tatting shuttle and a ball of size 30 crochet cotton in the color of your choice.
Abbreviations: r (ring) ds (double stitch) p (picot) cl r (close ring) sep (separated) rw (reverse work) ch (chain) rnd (round)
First Medallion: R of 7 ds, 6 p sep by 8 ds, 1 ds, cl r. Tie and cut threads.
Rnd 1: Make a r of 4 ds, 4 p sep by 3 ds, 3 ds, a 1 inch p (to make a 1 inch p: cut a piece of cardboard 1 inch wide, make first half of stitch, insert cardboard, with thread around cardboard, make last half of stitch. Remove cardboard and continue tatting as usual), 3 ds, 4 p sep by 3 ds, 4 ds, cl r, rw. Tie ball thread to shuttle thread, ch 26 ds, a small p, 22 ds, join 1 inch p in p of center r (when joining 1 inch p to center r insert hook from underside of the 1 inch p and down through p on center r), ch 22 ds, small p, ch 26 ds, join in base of last r made, rw. * Ch 6 ds, 9 p sep by 2 ds, 6 ds, join to next small p of ch, ch 6 ds, 9 p sep by 2 ds, 6 ds, rw. R of 4 ds, 4 p sep by 3 ds, 3 ds, a 1 inch p, 3 ds, 4 p sep by 3 ds, 4 ds, cl r, rw. Ch 26 (this ch fits inside the last ch made), join to same small p of adjacent ch where last ch was joined, ch 22 ds, join 1 inch p of last r to next p of center r, ch 22 ds, a small p, ch 26 ds, join at base of last r made, rw. Repeat from * until 6 hearts are made, be sure to join last long ch to small p of first long ch. After joining in last small p, ch 6 ds, 9 p sep by 2 ds, 6 ds, join in base of first r. Tie and cut threads.
Make a second medallion in same manner as first medallion joining the 7th and 8th p of one 9 p ch of one heart and the second and third p of next 9 p ch of same heart to corresponding p of first medallion.
Make 4 more medallions, joining each to last medallion made and also to the next heart of first medallion. The seventh (last) medallion must be joined in same manner to the sixth medallion, the first medallion and the second medallion. Tie and cut threads.
Pin doily in shape and spray with starch. Allow to dry thoroughly before removing pins.

U get many more from here.